Description of 1.2 meter shrink heat tunnel Semi-auto sleeve bottle labeling
machine
The steam shrinking furnace has greatly improved heat shrinkage
efficiency, and is used for round bottles, split bottles, flat
bottles and other bottle shapes of different specifications. It is
easy to adjust and maintain, and the shrinkage is flat. The steam
ejection method is designed in the form of separate steam bubbles.
The pipeline is smooth and does not occupy space. Each side of the
ejection outlet is divided into 3 sections. The height, front and
back of each section and the air output can be adjusted separately
to achieve the best The realm of perfect shrinkage effect. The
low-pressure sub-steam bubble adopts seamless steel pipe design,
each connecting pipe uses stainless steel hose quick coupling,
which is easy to disassemble and install. The whole machine shell
uses a stainless steel drain pan to concentrate the condensed
water, which can be taken over and discharged. The working
environment is not affected. The box is attached There are two
windows at the front and the back, and the whole machine adopts a
waterproof design and is made of stainless steel.
Advantages for our 1.2m steam heat tunnel for bottle sleeve shrinking:
1. Take the lead in adopting steam shrink technology
2. High heat shrinkage efficiency, simple adjustment for different
and irregular round bottles, square bottles, flat bottles and other
bottle shapes
3. The whole machine has three layers of heat insulation to reduce
heat loss. It adopts waterproof design and is made of stainless
steel 304
4. Equipped with thermometer and pressure gauge, steam pressure and
shrinkage temperature are clear at a glance, easy to start
operation
5. The steam inlet valve is equipped with a dial to save the
startup time of each shift operation
6. Each nozzle on both sides of the whole machine can adjust its up
and down/inside and outside position and spray direction
7. The front and rear ends of the whole machine are equipped with
inlet and outlet guards to reduce steam leakage and heat
preservation
8. A drain pan is installed in the lower part of the whole fuselage
to collect the condensed water and discharge it in a centralized
manner to prevent the problem of dampness in the site
Equipment list of 1.2m steam heat tunnel for bottle sleeve
shrinking:
| Items | Name of machine | Model | Size(mm) | Qty. |
1.1 | Sleeve table+ sleeve shrink tunnel | SB-1000 | 1200*700*2000 | 1set |
| 1.2 | Steam generator | LDR-12-0.7Z | 760*570*1030 | 1set |
| 1.3 | Conveyor | 4 meter length with 1 motor | 1set |
